Passivity-based controller for charging of Lithium-ion battery model 18650

https://doi.org/10.58571/CNCA.AMCA.2022.034

Resumen: This article deals with a lithium-ion battery charger using a passivity-based controller (called: the exact tracking error dynamics passive output feedback (ETEDPOFC)), which uses the constant-current constant-voltage (CC-CV) protocol. For this, the charger system consists of 3 phases. The first phase involves designing the dc-dc buck power converter, considering the operating voltage and maximum current the battery can withstand—where the passivity-based control operates in the balance points proposed as a function of the load protocols. The second phase consists of the general PSIM simulation of the system (converter + battery), which uses the Shepherd model to characterize the battery used in the tests. Finally, the third phase shows the implementation based on the system’s TMS320F28335 card DSP, just like the experimental results

¿Cómo citar?

Martínez Lópe, A., Linares Flores, J., Hernández Méndez, A., Orantes Molina, A., Antonio Juárez Abad, J. & Barahona Avalos, J. Passivity-based controller for charging of Lithium-ion battery model 18650. Memorias del Congreso Nacional de Control Automático, pp. 181-186, 2022. https://doi.org/10.58571/CNCA.AMCA.2022.034

Palabras clave

Control Basado en pasividad; Sistemas Electrónicos de Potencia; Control de Sistemas Lineales

• Baceiredo, A. (2016). Diseño y realización de un cargador de baterías para la alimentación de una estación meteorológico autónoma. Tesis de licenciatura, Universitat Rovira I Virgili.
• Flores, J.L., Avalos, J.L.B., and Espinosa, C.A.B. (2011). Passivity-based controller and online algebraic estimation of the load parameter of the dc-to-dc power converter cuk type. IEEE Latin America Transactions, 9(1), 784–791.
• Hart, D.W., Vuelapluma, and Bautista, A.B. (2001). Electrónica de potencia, volume 32. Prentice Hall Madrid, España.
• Linares-Flores, J., Hernández-Méndez, A., Juárez-Abad, J., Contreras-Ordaz, M., and García-Rodriguez, C. (2021). Mppt novel controller based on passivity for the pv solar panel-boost power converter combination. In 2021 IEEE Energy Conversion Congress and Exposition (ECCE), 310–315. IEEE.
• Logroño, J. (2017). Cargador de batería para vehículos. B.S. thesis, Universitat Politècnica de Catalunya.
• Marquez, H.J. (2003). Nonlinear control systems: análisis and design. Hoboken John Wiley.
• Obaya, M. and Céspedes, M. (2021). Análisis de las redes globales de producción de baterías de ion de litio: implicaciones para los países del triángulo del litio.
• Serra, F.M. and De Angelo, C.H. (2021). Control de un cargador de baterías para vehículos eléctricos con factor de potencia unitario.
• Sira-Ramirez, H.J. and Silva-Ortigoza, R. (2006). Control design techniques in power electronics devices. Springer Science & Business Media.
• Tomaszewska, A., Chu, Z., Feng, X., O’Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019). Lithium-ion battery fast charging: A review. ETransportation, 1, 100011.
• Tremblay, O. and Dessaint, L.A. (2009). Experimental validation of a battery dynamic model for ev applications. World electric vehicle journal, 3(2), 289–298.