About PMSM Current Tracking Control with Parameter Uncertainty

https://doi.org/10.58571/CNCA.AMCA.2023.029

Resumen: In this work, the problem of parameter uncertainty of the Permanent Magnet Synchronous Motor (PMSM) model in the $dq$ reference frame is studied by implementing an adaptive control scheme. The starting point of this paper is to analyze the system structure and represent the system as an interconnection between the electric subsystem, which is a completely actuated system, and the mechanical subsystem which is not actuated. This decomposition allows the design of a current tracking control based on the Passivity Based Control (PBC) methodology for the electrical subsystem. The interconnection, which is power preserving, allows to consider the unactuated mechanical subsystem as a passive perturbation that is proven to be bounded. The numerical evaluation was done by a MATLAB Simulink simulation with a comparison that shows that the designed control is able to deal with the parameters uncertainties of the electrical subsystem.

¿Cómo citar?

Davila-Tenorio, Sinuhe; Ramos-García, Fernada; Granados-Salazar, Christian; Espinosa-Perez, Gerardo. About PMSM Current Tracking Control with Parameter Uncertainty. Memorias del Congreso Nacional de Control Automático, pp. 127-132, 2023. https://doi.org/10.58571/CNCA.AMCA.2023.029

Palabras clave

Control de Sistemas No Lineales; Sistemas Adaptables; Sistemas Electromecánicos

• Alfehaid, A.A., Strangas, E.G., and Khalil, H.K. (2020). Speed control of permanent magnet synchronous motor with uncertain parameters and unknown disturbance. IEEE Transactions on Control Systems Technology, 29(6), 2639-2646.
• Chiasson, J. (2005). Modeling and high performance control of electric machines. John Wiley & Sons. El-Refaie, A.M. (2013). Motors/generators for traction/propulsion applications: A review. IEEE Vehicular Technology Magazine, 8(1), 90-99.
• Hong, D.K., Hwang,W., Lee, J.Y., andWoo, B.C. (2018). Design, analysis, and experimental validation of a permanente magnet synchronous motor for articulated robot applications. IEEE Transactions on Magnetics, 54(3), 1– doi:10.1109/TMAG.2017.2752080.
• Kazerooni, M. and Kar, N.C. (2011). Methods for determining the parameters and characteristics of pmsm. In 2011 IEEE International Electric Machines & Drives Conference (IEMDC), 955-960. IEEE.
• Kosaka, M. and Uda, H. (2009). Parameters identification for interior permanent magnet synchronous motor driven by sensorless control. Journal of low frequency noise, vibration and active control, 28(4), 269-283.
• Krause, P.C. (1986). Analysis of electric machinery mcgraw-hill book company. New York.
• Liu, K., Hou, C., and Hua, W. (2019). A novel inertia identification method and its application in pi controllers of pmsm drives. IEEE Access, 7, 13445-13454.
• Menon, R., Kadam, A.H., Azeez, N.A., and Williamson, S.S. (2016). A comprehensive survey on permanente magnet synchronous motor drive systems for electric transportation applications. In IECON 2016 – 42nd Annual Conference of the IEEE Industrial Electronics Society, 6627-6632. doi:10.1109/IECON.2016.7793136.
• Rueda-Escobedo, J.G., Metzkow, R., and Schiffer, J. (2023). Robust current control of ipmsm drives under uncertain and varying inductances. Automatica, 152, 110998.
• Shah, D., Espinosa-P´erez, G., Ortega, R., and Hilairet, M. (2014). An asymptotically stable sensorless speed controller for non-salient permanent magnet synchronous motors. International Journal of Robust and Nonlinear Control, 24(4), 644-668.
• Sun, Y., Yang, M., Wang, B., Chen, Y., and Xu, D. (2023). Precise position control based on resonant controller and second-order sliding mode observer for pmsm-driven feed servo system. IEEE Transactions on Transportation Electrification, 9(1), 196-209. doi:10.1109/TTE.2022.3182027.
• Waide, P. and Brunner, C.U. (2011). Energy-efficiency policy opportunities for electric motor-driven systems.
• Zeng, M.X. and Ouyang, W. (2013). Cnc servo System base on pmsm. In Applied Mechanics and Materials, volume 331, 267-270. Trans Tech Publ.