Julio C. Flores | Universidad Nacional Autónoma de México |
Alejandro Gutierrez-Giles | Universidad Nacional Autónoma de México |
https://doi.org/10.58571/CNCA.AMCA.2022.081
Resumen: The design and construction of a signal-acquisition and control platform for its use to control a robotic manipulator is proposed in this work. The system consists of an open-loop architecture robotic arm with DC motors and encoders, whose signals are acquired and processed using a standard PC. This platform can be potentially used for research and teaching purposes. The main contribution is its low-cost modular design with widely available components, which permits to scaling it for manipulators with several degrees of freedom. The performance of the designed system is tested by several experiments with different nonlinear controllers.
![Design and construction of a low-cost robotic system for teaching and research](/wp-content/uploads/2022/04/logotipo_amca100.png)
¿Cómo citar?
Flores, J & Gutierrez-Giles, A. Design and construction of a low-cost robotic system for teaching and research. Memorias del Congreso Nacional de Control Automático, pp. 533-538, 2022. https://doi.org/10.58571/CNCA.AMCA.2022.081
Palabras clave
Robótica y Mecatrónica; Educación en Control; Tecnología para Control
Referencias
- Arteaga, M.A., Guti´errez-Giles, A., and Pliego-Jiménez, J. (2021). Local Stability and Ultimate Boundedness in the Control of Robot Manipulators. Springer.
- Benitez, V.H., Symonds, R., and Elguezabal, D.E. (2020). Design of an affordable iot open-source robot arm for online teaching of robotics courses during the pandemic contingency. HardwareX, 8, e00158.
- Bona, B. and Indri, M. (2005). Friction compensation in robotics: an overview. In Proceedings of the 44th IEEE Conference on Decision and Control, 4360–4367. IEEE.
- Elfasakhany, A., Yanez, E., Baylon, K., Salgado, R., et al. (2011). Design and development of a competitive lowcost robot arm with four degrees of freedom. Modern mechanical engineering, 1(02), 47.
- Kim, H.S. and Song, J.B. (2013). Low-cost robot arm with 3-dof counterbalance mechanism. In 2013 IEEE International Conference on Robotics and Automation, 4183–4188. IEEE.
- Maldonado, J., Lopez, K., Garrido, R., and Mondié, S. (2018). Implementing time-delay controllers on an educational motion control platform. In 2018 XX Congreso Mexicano de Robótica (COMRob), 1–6. IEEE.
- Ortega, R. and Spong, M.W. (1989). Adaptive motion control of rigid robots: A tutorial. Automatica, 25(6), 877–888.
- Ramos, J.J.M., Pineda, J.L.L., Moctezuma, R.A.G., and Zavala, J.G.C. (2019). A teaching methodology based on an educational experimental platform. IEEE Latin America Transactions, 17(08), 1363–1370.
- Slotine, J.J.E. (1985). The robust control of robot manipulators. The International Journal of Robotics Research, 4(2), 49–64.
- Slotine, J.J.E. and Li, W. (1987). On the adaptive control of robot manipulators. The international journal of robotics research, 6(3), 49–59.
- West Instruments (2022). Manual de Aplicación de Encoders.