Seismic signal estimation in a building-like structure using an adaptive observer

https://doi.org/10.58571/CNCA.AMCA.2023.039

Resumen: The article focuses on the estimation of a seismic signal in a building-like structure using an adaptive observer. This algorithm allows to estimate to the behavior of the structure based on the accelation measurements, achieving the estimation of uncertain signal. Thus, an adaptive observer is proposed, which estimates both the state and unknown input. The approach is validated by simulating a two-story system using real data from a real earthquake. The results demonstrate the effectiveness of the observer in estimating the displacements in the structure and the unknown seismic signal.

¿Cómo citar?

Hernandez Gonzalez, Omar; Targui, Boubekeur; Galaz Palma, Rene Ruben; Valencia-Palomo, Guillermo; Rafael Armando, Galaz Bustamante. Seismic signal estimation in a building-like structure using an adaptive observer. Memorias del Congreso Nacional de Control Automático, pp. 290-295, 2023. https://doi.org/10.58571/CNCA.AMCA.2023.039

Palabras clave

Control de Sistemas Lineales; Modelado e Identificación de Sistemas; Control Clásico

• Arabha Najafabadi, A., Daneshjoo, F., and Ahmadi, H.R. (2020). Multiple damage detection in complex bridges based on strain energy extracted from single point measurement. Frontiers of Structural and Civil Engineering, 14(3), 722-730.
• Benabdelhadi, A., Giri, F., Ahmed-Ali, T., Krstic, M., El Fadil, H., and Chaoui, F.Z. (2021). Adaptive observer design for wave pdes with nonlinear dynamics and parameter uncertainty. Automatica, 123, 109295.
• Chen, B.S., Lee, M.Y., Chen, W.Y., and Zhang, W. (2021). Reverse-order multi-objective evolution algorithm for multi-objective observer-based fault-tolerant control of t-s fuzzy systems. IEEE Access, 9, 1556 -1574.
• Das, S., Saha, P., and Patro, S. (2016). Vibrationbased damage detection techniques used for health monitoring of structures: a review. Journal of Civil Structural Health Monitoring, 6(3), 477-507.
• Erazo, K. and Hernandez, E.M. (2014). A model-based observer for state and stress estimation in structural and mechanical systems: Experimental validation. Mechanical Systems and Signal Processing, 43(1), 141-152.
• Fan, W. and Qiao, P. (2011). Vibration-based damage identification methods: A review and comparative study. Structural Health Monitoring, 10(1), 83–111.
• Galaz-Palma, R., Targui, B., Hernandez-Gonzalez, O., Valencia-Palomo, G., Espinoza-Molina, A., and Guerrero-Sánchez, M.E. (2022). Robust observer for input and state estimation in building structure systems. Journal of Vibration and Control, 0(0), 10775463221117863.
• He, Z., Li, W., Salehi, H., Zhang, H., Zhou, H., and Jiao, P. (2022). Integrated structural health monitoring in bridge engineering. Automation in Construction, 136, 104168.
• Hernandez, E.M. (2011). A natural observer for optimal state estimation in second order linear structural systems. Mechanical Systems and Signal Processing, 25(8), 2938-2947.
• Jiménez, Rene y Alvares-Icaza, L. (2004). Observador adaptable para edificios basado en mediciones de fuerza y aceleraci´on. Journal of Vibration and Control, 318-323.
• Meirovitch, L. (2010). Fundamentals of vibrations. Waveland Press.
• Morales-Valdez, J., Lopez-Pacheco, M., and Yu, W. (2019). Detección de daño en edificios basada en datos de aceleración y redes neuronales convolucionales. Memorias del Congreso Nacional de Control Automático, 145-150.
• Xu, L., Cui, Y., and Wang, Z. (2020). Active tuned mass damper based vibration control for seismic excited adjacent buildings under actuator saturation. Soil Dynamics and Earthquake Engineering, 135, 1-11.
• Zhu, F., Shan, Y., Zhang, J., and Wang, F. (2020). Observer-based fault reconstructions and fault tolerant control designs for uncertain switched systems with both actuator and sensor faults. IET Control Theory y Applications, 14.